Slurry / Manure Pump ER4-S with underfloor discharge Specification
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm.
The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to homogenise the slurry before pumping by stirring up floating or sinking layers.
The robust Euro-P-type impeller transforms the power of the drive into a high flow rate. The special design of the steel made impeller consists of an intake screw with hardened cutting edges to shred straw and fibres. The hefty cast-iron volute sustains even the most wearing applications and is one of the reasons for the high durability.
Basic length for pit depths up to 1.65m; all further extensions in steps of 25cm to the basic length. Special sizes are manufactured on request. With a 90° bend as discharge to connect an underfloor pipe.
Typical Fields of Application
- manure agitation
- homogenisation of manure before pumping
- transfer to storage tank
- flushing applications
- filling of slurry tankers