electric motor pumps

Dry Installed Slurry / Manure Pump ER4-E L Specification

ER4-type centrifugal slurry / manure pump with air-cooled electric motor for stationary dry installation. Mounted on an installation frame in horizontal position for inline pumping applications.

Default suction side standard flange DIN2633 ø300. Pressure side flange square MZ-flange 180x180.

The robust Euro-P-type impeller transforms the power of the drive into a high flow rate. The special design of the steel made impeller consists of an intake screw with hardened cutting edges to shred straw and fibres. The hefty cast-iron volute sustains even the most wearing applications and is one of the reasons for the high durability.

The ER4-E L ist the counterpart to the ER3-E L horizontal dry installed pump. All ER4-type pumps are equipped with a special large volute to allow drive power of up to 30kW electric motors.
The default position for the pressure connector is at the vertical top position of the pump, but it can be adjusted to any angle to the left or right by turning the volute.

Typical Fields of Application

intertank transfers
filling of slurry tankers
biogas facilities

Technical Specification

motor nominal power	choice out of 3 different AC motors with 18.5kW, 22kW and 30kW
protection class	IP55
rated speed	1450 rpm
operating voltage	400V 3~, 50Hz
pressure line	133mm
suction side connection	DIN2633 PN16 D=300
flange connection at outlet	square MZ-flange 180x180
oil qty	3,0 ltr
lubrication oil	HLP 46

Materials

volute	cast iron
coupling housing	cast iron
impeller and intake ring	steel, matching drive power, with tungsten carbide edges
bolts	stainless steel
other metal parts	galvanized, stainless on request

Standard Delivery

With a transparent acrylic oil reservoir
Without starter; please order starters matching drive power separately.

Pump ER4-E L	Order No
18.5 kW e-motor	68-98-259
22 kW e-motor	68-98-309
30 kW e-motor	68-98-359