Submersible pumps
Specification Sullage Pumpe EP1
EP1 submersible pump for waste and drain water containing fibrous materials or other solids. All parts in contact with the water in stainless steel.
Motor powers from 0.55 to 2.20 kW (AC motor). Up to 1.10 kW also available with single-phase motors.
Available in two different layouts. With pedestal and 2” connection or without pedestal with flange. Pumps with a flange are suited for pit installation with a discharge connector and guide bars
Fields of Application
- silage effluents
- sullage
- milking parlour waste water
Technical Specification
motor nominal power | single phase: 0.55 kW; 0.75 kW; 1.10 kW three phase: 0.55 kW; 0.75 kW; 1.10 kW; 1.50 kW; 2.20 kW |
protection class | IP68 |
operating voltage | single phase: 230V 3~, 50 Hz three phase: 400V 3~, 50 Hz |
outlet | 2" connector or flange DN50 |
sealing | carbon silicide mech seal |
Materials
housing | stainless steel |
impeller | stainless steel |
volute | stainless steel |
cable lead-in | stainless steel |
motor spacer ring | cast iron GG |
Submersible Pump EP1 with 2" Socket and Pedestal
0,55 kW | single phase | 68-79-055 |
0,75 kW | single phase | 68-79-075 |
1,10 kW | single phase | 68-79-110 |
0,55 kW | three phase | 68-79-056 |
0,75 kW | three phase | 68-79-076 |
1,10 kW | three phase | 68-79-111 |
1,50 kW | three phase | 68-79-151 |
2,20 kW | three phase | 68-79-221 |
Submersible Pump EP1 with flange w/o Pedestal
0,55 kW | single phase | 68-79-060 |
0,75 kW | single phase | 68-79-080 |
1,10 kW | single phase | 68-79-115 |
0,55 kW | three phase | 68-79-061 |
0,75 kW | three phase | 68-79-081 |
1,10 kW | three phase | 68-79-116 |
1,50 kW | three phase | 68-79-156 |
2,20 kW | three phase | 68-79-226 |